Additives
PA01-LSA Solution
Dissolved polystyren solution in styren.
PA02-LSB Solution
Solution of polyvinyl acetate dissolved in styrene.
PA03-Paraffin Solution (10%)
Dissolved paraffin solution in styrene.
PA04-Paraffin Solution (15%)
Dissolved paraffin solution in styrene.
PA05-Foam Cutter
Polyester is used to remove the foam formed in the mixture prepared during the application of resins from the system.
PA06-Amine Accelerator
It is used where very fast curing is necessary. Reduces the shelf life of resin. For this purpose, the amine mixture added during the application should be used in a short time. The recommended utilization rate is 0.01-0.1%.
PA07-Amine Accelerator
It is used when fast curing is required. The effect of the resin on the shelf life is very low compared to PA06. For this, amine resin can be used within its shelflife. The recommended usage rate is 0.05-0.5%.
PA08-inhibitor Solution
PA08 are mixtures containing inhibitors to increase the shelf life and gel time of resins and gelcoats.
| T | Thixotropic | LS | Low Pick | ||
| A | Cobalt Accelerator | HV | High Viscosity | ||
| B | Blue Indiator | LV | Low Viscosity | ||
| D | Filled | UV | UV Absorber | ||
| FR | Flame Reterdant | FT. | Brush and Roll Application | ||
| LSE | Low Strien Emissions | TT | Spray Application | ||
| ABP | Amen Pre-Accelerator |
 |
Colorful | ||
| WV | Winter Version |
 |
Transparent | ||
| SV | Summer Version |
 |
White Gelcoat | ||
| TE | Teraftalic Acid | W | White Resin | ||
| FRHI | Flame retardant Halogenated Isophthalide | H | Halogenated | ||
| FRH | Flame Retardant Halogenated |
Packing
You can choose the type of package you would like or contact our sales department for information about container options.
